renovation

[sistagirl]

Re: renovation

Aww poor Ochi [img]/forums/images/graemlins/frown.gif[/img] hush.

Kia, man the place is looking niiiice! [img]/forums/images/graemlins/70409-waytogo.gif[/img] the updates are beautiful. I love the cabinets and the countertops and the french doors are gorgeous!

I so want to do some of the same things you have and update/remodel but must either 1)wait awhile 2)just move [img]/forums/images/graemlins/frown.gif[/img]

Patience is not my strong trait [img]/forums/images/graemlins/70390-shhh.gif[/img] actually I don't even HAVE the trait in my genes [img]/forums/images/graemlins/704555_dwl.gif[/img]

[kia027]

Re: renovation

I know what you mean by wait awhile sistagirl.. I am chomping at the bit to do some updates to the kitchen but u done know seh once you touch one area.. all the others fall right in and kitchens are major [img]/forums/images/graemlins/70379-moneyeyes.gif[/img]


Update:

So we get near completion and mi notice when mi walk pon de new part of the floor it a squeak.. Upon investigation it was determined the whole floor has to come up and be glued down again because the carpenter who mi love to death didnt have the experience to do it quite right and when u walk pon de new pawt of the floor we dida watch the 'wave' pon de floor.


We were supposed to have final inspection laws weeks [img]/forums/images/graemlins/70394-bawlout.gif[/img]

[Gen]

Re: renovation

[ QUOTE ]
I know what you mean by wait awhile sistagirl.. I am chomping at the bit to do some updates to the kitchen but u done know seh once you touch one area.. all the others fall right in and kitchens are major [img]/forums/images/graemlins/70379-moneyeyes.gif[/img]


Update:

So we get near completion and mi notice when mi walk pon de new part of the floor it a squeak.. Upon investigation it was determined the whole floor has to come up and be glued down again because the carpenter who mi love to death didnt have the experience to do it quite right and when u walk pon de new pawt of the floor we dida watch the 'wave' pon de floor.


We were supposed to have final inspection laws weeks [img]/forums/images/graemlins/70394-bawlout.gif[/img]

[/ QUOTE ]

bway mi nuh know mi dear..but a only certain people mi reserve the word 'love' fah [img]/forums/images/graemlins/grin.gif[/img]

wa mek him nevah tell yuh seh him nuh ha nuh experience inna it [img]/forums/images/graemlins/70388-shameonyou.gif[/img]

[St_Bess]

Re: renovation

[ QUOTE ]
I know what you mean by wait awhile sistagirl.. I am chomping at the bit to do some updates to the kitchen but u done know seh once you touch one area.. all the others fall right in and kitchens are major [img]/forums/images/graemlins/70379-moneyeyes.gif[/img]


Update:

So we get near completion and mi notice when mi walk pon de new part of the floor it a squeak.. Upon investigation it was determined the whole floor has to come up and be glued down again because the carpenter who mi love to death didnt have the experience to do it quite right and when u walk pon de new pawt of the floor we dida watch the 'wave' pon de floor.


We were supposed to have final inspection laws weeks [img]/forums/images/graemlins/70394-bawlout.gif[/img]

[/ QUOTE ]

Kia - I watched an episode of This Old House a few weeks ago where the GC Tom Silwa fixed squeaky floor in someone's house. See below.

Fixing a Squeaky Floor

Squeaky floors driving you crazy? These easy, surefire fixes will quiet noisy hardwood and carpeted floors.
by Merle Henkenius

Squeaky floors may alert you to kids sneaking in past curfew, but they've got little else going for them. Annoying floor squeaks, common in many homes, typically occur after the house has settled and flooring lumber has dried out and shrunk. As you walk across the floor, boards rub against each other or slide against nail shafts to produce a cacophony of squeaks and creaks. Loose subflooring -- both solid-board and plywood types -- will also emit high-pitched chirps.

Traditional hardwood strip flooring is the most susceptible to developing a case of the squeaks, but all types of flooring can make annoying noises. The good news is that it's easy to silence nearly any squeak in a matter of minutes -- if you know a few tricks. Here, we'll show you how to eliminate squeaks when working below the floor and above it. We even include tips for quieting carpeted areas and noisy stairs.

Repairs from below

If the floor is over a basement or crawl space, go below to make the repairs. Start by having someone walk across the floor while you listen from below. When you hear a squeak, have the person above rap on the floor so you can pinpoint the exact spot. Next, take a thin wood shim and coat it with carpenter's glue. Gently tap the shim into the space between the joist and subfloor. Don't drive it in too far because you will raise the flooring. You just want to fill the gap above the joist and take out any "give" in the floor. For additional support, drive a 1 1/4-in. drywall screw at an angle up through the joist and shim and into the subfloor.

Another effective way to silence floors from below is with a cleverly designed piece of hardware called the Squeak-Ender ($7). It consists of a threaded rod attached to a flat mounting plate and a steel bracket fitted with a squared-off hook on one end. Installation is easy:

Screw the mounting plate to the underside of the subfloor with the four screws provided. Position it directly under the squeaky spot. Slide the bracket over the threaded rod and hook it onto the joist. Spin a nut onto the rod, then tighten it with a wrench until the subfloor is pulled down snug against the joist.

Hold-down bracket

1. Hold the Squeak-Ender's steel mounting plate against the joist, then screw it to the plywood subfloor.

2. Tighten the nut with a wrench until the subfloor is pulled down snug against the floor joist.

Glue-coated Shims

1. Tap a wood shim into the gap above the floor joist after smearing the shim with carpenter's glue.

2. Drive a drywall screw at an angle up through the joist and shim and into the plywood subfloor above.

Working from Above

When you can't get access to the floor joists from below, your only choice is to make the repairs from above. The trick, however, is to silence the squeaks without damaging the finished floor. Fortunately, there are two fastening systems, both manufactured by O'Berry Enterprises, that can do just that.

Carpeting. The Squeeeeek-No-More Kit (about $30) can be used on carpeting laid over a wood subfloor. The kit consists of a screwdriver bit, pilot screw to help you locate joists, depth-control fixture and 50 specially designed breakaway screws. First, locate the joist nearest the squeak. Stand the depth-control fixture on the carpet directly over the joist. After wrapping transparent tape around one of the screws to prevent it from catching on the carpet strands, drive it through the fixture. Remove the fixture, tip it sideways and insert the screwhead into the slot in the top of the fixture. Rock the fixture side to side until the screwhead snaps off below the surface of the subfloor.

Creaks under carpet

1. Set the three-legged depth-control fixture over a joist, then drive in one of the special Squeeeeek-No-More screws. Be sure to wrap the screw with the transparent tape provided so it doesn't snag the carpet fibers.

2. The depth-control fixture doubles as a snap-off tool. Insert the screwhead into the slot, then rock the fixture back and forth until the screw breaks off below the surface.

Hardwood. The Counter-Snap Kit ($8) provides an effective, nearly undetectable way to stop squeaks in hardwood floors. The kit comes with a screwdriver bit, depth-control fixture and 25 breakaway screws. But, unlike the Squeeeeek-No-More system, the screwhead automatically snaps off when you drive the screw into the depth-control fixture.

Start by boring a 3/32-in.-dia. pilot hole through the floorboard nearest the squeak. Next, put a screw through the depth-control fixture and into the pilot hole. Drive in the screw until it snaps off below the surface of the wood. To conceal the screw, fill the pilot hole with wood putty. It may not be possible to silence every squeak in your home, but with the techniques described here, you can certainly cut down the chatter to an occasional chirp.

Hardwood floor

1. After locating the squeak, bore a 3/32-in.-dia. pilot hole through the hardwood flooring; it isn't necessary to hit a joist below.

2. Set the Counter-Snap's depth-control fixture over the pilot hole. Drive the screw down until it bottoms out and automatically snaps off.

3. Fill the pilot hole with tinted wood putty. Allow it to dry, then lightly sand the spot. You can also use a crayon-type putty stick.

Quieting Squeaky Stairs

The typical interior staircase produces more squeaks and squawks than a flock of angry geese. The reason? Staircases are assembled from dozens of wood parts. Over time, these parts expand and contract and the joints between them loosen up. As a result, every step you take -- up or down --emits an irritating creak or groan. Four simple techniques for reducing stair squeaks are shown here.

Look for access to the back of the stairs in closets and the basement -- these repairs are the most effective. From the rear, tap glue-coated shims into the joints between the horizontal treads and vertical risers. Or, screw wood blocks into the corners where the risers meet the treads.

When you can't get behind the staircase, try one of these topside repairs: Take several very thin wood shims and tap them into any loose or squeaky joints that you find . Neatly trim off the shims with a utility knife.

Another way to reinforce loose parts is to glue and nail a length of quarter-round molding along each step.


Where to find it:

E&E Consumer Products
7200 Miller Dr.
Dept. TH1299
Warren, MI 48092
800/854-3577
(Squeak-Ender)

O'Berry Enterprises
3980 Albany
Dept. TH1299
McHenry, IL 60050
www.oberry-enterprises.com
800/459-8428
(Squeeeeek-No-More and Counter-Snap Kits)

[kia027]

Re: renovation

cause im talk to the project manager who then supposed to tell mi them things deh.. He has put down floorw before but not bamboo planks.

It was supposed to work but alas the method was different was different cause it was going on a concrete floor.

[kia027]

Re: renovation

St Bess is the contractors doing this so mi nah fret it.

When my husband put down the floor initially (1/2 of it had to be taken up for the renovation) he glued the sucker down on top of the old vinyl tile which was ok.

the manufacturer of the floor says the planks should be glued but didnt specify if it was to each plank or to the floor.

The carpenter glued to the plank and it looks like the floor was not completely even which resulted in the 'wave'

so dem pull up the floor , the boxes of new planks are on their way and dem a even up the floor

I just wanted to not have to share my home with extra people much longer [img]/forums/images/graemlins/70394-bawlout.gif[/img]

And of course I dont have to pay any [img]/forums/images/graemlins/70379-moneyeyes.gif[/img] for this fix

[kia027]

Re: renovation

Finalmente [img]/forums/images/graemlins/bannana_purple.gif[/img]

dem finish up yestideh.. All a de likkle sinting dem done done done [img]/forums/images/graemlins/bannana_purple.gif[/img]

so mi get call dis am fi square final payment- mi just remind im seh fiwi township seh we noh fi pay unno till we pass final inspection so galang go schedule it and call me back fi $$ when we pass ie [img]/forums/images/graemlins/70388-shameonyou.gif[/img]

[sistagirl]

Re: renovation

[img]/forums/images/graemlins/70371-jump.gif[/img] [img]/forums/images/graemlins/70371-jump.gif[/img] [img]/forums/images/graemlins/70371-jump.gif[/img]

Yay!! where are the pics?

[Ochigal]

Re: renovation

[ QUOTE ]
Finalmente [img]/forums/images/graemlins/bannana_purple.gif[/img]

dem finish up yestideh.. All a de likkle sinting dem done done done [img]/forums/images/graemlins/bannana_purple.gif[/img]

so mi get call dis am fi square final payment- mi just remind im seh fiwi township seh we noh fi pay unno till we pass final inspection so galang go schedule it and call me back fi $$ when we pass ie [img]/forums/images/graemlins/70388-shameonyou.gif[/img]

[/ QUOTE ]

Lawd...jealousy a kill me. So Kia....what day you want me, hubby and Ochikid to show up for the holiday stay??? [img]/forums/images/graemlins/tongue.gif[/img] I am thinkin maybe arriving around the 21st so we can settle in nicely. Whatchoo fixin for Christmas dinner? [img]/forums/images/graemlins/wink.gif[/img]

[kia027]

Re: renovation

Sistergirl and Mrs Ochigal.. thank u [img]/forums/images/graemlins/70459-hugs.gif[/img]

Ochi
mi will be happy to fix anything except poak fi unnos... and de 21st is clear

Mi get a call Final Inspection dis Friday [img]/forums/images/graemlins/bannana_purple.gif[/img]

[Green_Biscuit]

Re: renovation

Great about Friday. So where are the pics??

[kia027]

Re: renovation

wait till friday when de sun a shine... and mi will show pics of the empty room...

or u can wait likkle longa mek mi furnish ie

[23JAM00]

Re: renovation

Kia
I'm looking forward to the finished product & pics too.. [img]/forums/images/graemlins/70371-jump.gif[/img]

[Green_Biscuit]

Re: renovation

So Miss Kia, what say you? [img]/forums/images/graemlins/wink.gif[/img]

[kia027]

Re: renovation

We are starting to move furniture back into the room.
Mummy's bed and chair with ottoman is on order.
Window treatments should be finished by end December
Since it is the Christmas season, we put the tree in the area and when the bed arrives (shortly after christmas) mummy will officially move into the space.

Some pics with the furniture we have.